Scoop: New Hornady A-Tip MATCH Bullets! Part 1

Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail
Facebooktwittergoogle_pluspinterestyoutube

Witness the creation of the ultimate low-drag, high performance match bullet!

Hornady A-Tip Bullets Now At Midsouth Shooters!

After weeks of teasers, we’re finally able to talk about the new projectile from the folks at Hornady. We actually got to visit Grand Island, Nebraska to tour the facility, and get a first-hand look at the new milled aluminum tipped bullets. This thing is beautiful!

“New to Midsouth Shooters and Hornady, the A-Tip MATCH bullets are the latest and greatest from the Hornady Ballistic Development Group! After years of research, testing, and a new advanced manufacturing process with state-of-the-art quality control measures, Hornady has created an all new Aluminum Tipped projectile. This precision machined tip is longer than polymer tips which moves the center of gravity, thus enhancing inflight stability. The aeroballistically advanced tip design results in tighter groups, and reduced drag variability.”

By using some of the most sophisticated tools in projectile development, Hornady created a bullet with a milled tip, 99% repeatable, and a Doppler Radar verified low-drag coefficient (super-high Ballistic Coefficient) with a winning blend of ogive, tip length, bearing surface, and optimized boat-tail within each caliber.

“We wanted to incorporate aluminum tips in a full line of match bullets for years because we can make longer tips than we can with polymer materials,” said Joe Thielen, Assistant Director of Engineering. “This longer tip is a key component that helps move the center of gravity of the bullet rearward, thus enhancing in-flight stability and reducing dispersion. The problem has always been the cost to produce a tip like this, but we’ve developed a cost-effective process for manufacturing these aluminum tips while staying affordable for serious match shooters. The longer aluminum tips are machined to be caliber-specific, and when coupled with highly refined AMP® bullet jackets, aggressive profiles and optimized boattails, the result is enhanced drag efficiency (high BC) across the board. Each bullet design is carefully crafted for minimal drag variability for the utmost in shot-to-shot consistent downrange accuracy.The materials, design and manufacturing techniques combine for the most consistent and accurate match bullets available.”

– Hornady

Right off the press, the projectiles are sequentially packed, for ultimate consistent performance, from lot to lot, ensuring your projectiles are truly YOURS every step of the way. Think of it like shooting clones of your load every time (100 in each box)! Minimal handling throughout the process means there’s less of a chance of YOUR bullet being marred, scuffed, or altered, which is why each box is packaged with a Polishing Bag for you to give the final buff to your beautiful new projectiles!

Hornady A-Tip MATCH Bullets:

6MM 110gr Hornady A-Tip6.5MM 135gr Hornady A-Tip 6.5MM 153gr Hornady A-Tip  30CAL 230gr Hornady A-Tip 30CAL 250gr Hornady A-Tip

Part 2 is forthcoming, with more in-depth analysis from Hornady’s lead technicians. Get ready for graphs, charts, and more! To read the press release, CLICK HERE!

Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

4 thoughts on “Scoop: New Hornady A-Tip MATCH Bullets! Part 1”

Comments are closed.