Tag Archives: Remington

REVIEW/RETROSPECT: A Look At An Old Bullseye Gun

Facebooktwittergoogle_pluspinterestyoutube

There were giants in those days… READ MORE

madore
G. Madore’s Bulls Eye gun is a Colt in most regards but definitely not like anything that left the Colt shop during the previous century.
madore
The pistol’s appearance is period and the performance outstanding.

Heyward Williams

When we reflect, ruminate, reminisce, and muse on the past, we generally use images from the past in our thoughts. Few are able to think completely in the abstract. When I think of my younger years and getting into shooting I recall my fascination for the 1911 .45 at an early age. That is a long fifty years ago, and my interest has never waned. Early in my shooting and working years I owned perhaps four or five good guns and usually traded one to get another. Sometimes I traded a good gun and didn’t get a better gun in the trade, but we have all had such mishaps. I think a great difference in the shooters of that time and the shooters beginning today is that they expect a handgun to be ready for use out of the box. To some it is a great surprise that few if any 1911 handguns were ready for competition in the 1970s and 1980s. Les Baer and Bill Wilson were yet to come. Some of the finest work ever accomplished on 1911 handguns was the work done by Army gunsmiths between 1918 and 1935. The Colt National Match gave us a decent bullseye gun but the best examples were turned out by shops ran by craftsmen that mixed art and mechanics, and sometimes engineering. I grew up in the heyday of these makers but could not afford one of their guns. Today I own one of the best examples of the era.

madore
A GI Slide was the basis for the Colt’s modification.

Very often when looking at the work of artists in steel we discover past styles that influenced their work. The pedigree is traced to the instructor or gunsmith where the artists did their journeyman work. Sometimes we have very little to go on save for the surviving work. I have seen several 1911 .45s modified by George Madore. These pistols are credible examples of the gunsmiths trade. There were many gunsmiths that performed good work and a few that were exceptional. My examination of the handgun on hand falls into the exceptional category. Madore worked on many handguns prior to his death about fifteen years ago. Among these were Hammerli 208 handguns and quite a few 1911s. He worked, by my best information, in a shop at his home, as many smiths of the era did. He provided witness targets with the guns. Among his innovations was a tab on the barrel to snug up the barrel fitting. I have also seen a single example of what must have been his later work. A 1911 slide was fitted with an AimPoint sight. Not on a rail or a mount but fitted directly to the slide, among the first examples of an optic mounted directly to a moving part. Today I often fire and enjoy my factory red dot equipped SIG P 229 RX. I did not know the direct AimPoint mount on a 1911 existed until recently. Madore definitely had a forward looking bent.

madore
These old Colts are similar in concept, giving the shooter an advantage over any factory gun of the era. The upper gun is fitted with MMC sights and had a trigger job performed. It is a good carry gun. The Madore is a target gun.
madore
The Madore gun, lower, is slightly more accurate the modern Colt Gold Cup, above, with most loads.

I found my own Madore 1911 in a reputable used shop. I knew it was a bullseye Colt and did some research before returning to purchase the piece. This beat doing the research after the fact, and that is a hard lesson for many of us! The piece features what is probably a GI slide and a Series 70 frame. As I looked more closely I found modifications that were popular in the era. This marks the pistol as one of his early guns, but I have no certainty save my own experience and opinion. As one example — some shooters either miss the standard GI or Colt Commercial grip safety or do not because they can’t depress it sufficiently to release the trigger. There is a great difference between a competition gun and a carry gun, and blocking the grip safety was common a generation or two ago. A thin wire was sometimes ran through a hole drilled in the frame and grip safety. Some were simply taped shut. The Madore guns were sometimes modified by cutting the leaf spring that controls the grip safety. This eliminated the grip safety’s lock on the trigger. You are free to use the thumbs forward grip and allow the palm to rise off of the grip safety. The pistol will fire. Much later, Novak offered a backstrap that eliminated the grip safety, and it is quite well made. The Madore modification worked. I should stress I strongly prefer an operating grip safety for a carry 1911, but for Bulls Eye, the Madore solution is fine. The pistol has some of the classic upgrades of the time. The slide features a well done scalloped ejection port. The square front post was possibly hand cut, but it may be a King’s — I am not certain. The rear sight is a Bomar. The Bomar is far more rugged than the factory Colt sights of the day. The stainless steel barrel bushing is tight and was difficult to turn. It required a large bushing wrench with plenty of leverage to turn and a bit of tapping to remove. The slide and frame are a tight fit. Since they are a mismatch this indicates that some fitting of the frame to the slide was done. There was no lateral play at all. The trigger action isn’t light but very smooth at four pounds even. There is no creep or backlash. The grips are a set of Pachmayr double diamonds with plenty of adhesion. While the Madore gun seems to be set up for Bulls Eye, this handgun, with a few changes, could make a fine all around .45 for general duty, even personal defense. I would return the grip safety to operation and install a heavy recoil spring and go about my business.

madore
The slide is tastefully engraved. Note lowered ejection port.

These handguns were not particularly expensive at the time, costing perhaps twice as much as a factory Gold Cup. Compared to the present price of Wilson Combat and Les Baer guns, they were a bargain. And they are true custom guns, each being an individual. A word to the wise — caution is indicated when investing in older custom guns. Be certain you know your way around the 1911 and its safety checks. There is no guarantee someone not up to Mr. Madore’s workmanship hasn’t had their hands on the gun in the interval since he built it. In this case I was lucky and the workmanship and function remain flawless. Another caution — if you expect this gun, a Heinie, Novak, or Action Works build to bring a fair price, it should have the original build list outlining the parts used. This one did not have that. A trip to the range was planned with some excitement. I lubricated the long bearing surfaces liberally and loaded a couple of MecGar magazines with a proven handload. The classic accuracy load for the .45 ACP is a 200 grain SWC over Unique for 850 fps- at least in my book. From a solid benchrest firing position I put five rounds into 1.5 inches at 25 yards. Perhaps the accuracy potential is even greater with a bit of handloading and hard work. I also fired five rounds of the Remington 230 grain Black Belt JHP. The pistol not only fed well; the five rounds clustered into 1.75 inches. This is exceptional accuracy for any 1911. The G. Madore marked pistol has a sense of history and emotional attachment combined with excellent performance. I am proud to own this well turned out pistol.

madore
The Madore gun features a solid adjustable trigger.

REVIEW: Remington 870 DM

Facebooktwittergoogle_pluspinterestyoutube

This may be the best pump action shotgun for your needs… READ WHY HERE

870 DM
The author finds the 870 DM a good all around shotgun with much to recommend.

Bob Campbell

The Remington 870 DM is a detachable magazine pump action shotgun that is garnering a great deal of interest and both positive and negative comments. It isn’t the first detachable magazine shotgun as the AK types have been in use for some time and there are detachable aftermarket kits for modifying existing shotguns. But this is a production pump action shotgun from the Big Green. Some feel the popularity of the AR 15 rifle had led to the detachable magazine shotgun. The tube fed shotgun just worked so well with so little complaint the only attention it received was a long extended magazine tube. It is interesting that Remington did not choose a self loading shotgun. Then there is the magazine, which at six shells is hardly a high capacity type. Just the same the shotgun bears study as it offers many advantages for both individuals and police departments.

The pump action shotgun is a model of reliability and the Remington 870 among the most respected. Since the pump action shotgun is manually operated the power or recoil impulse of the shells doesn’t matter. Low brass birdshot or Magnum buckshot is equally reliable in the pump action shotgun. The shooter manipulates the action and a trained shooter can be pretty fast with a smooth shotgun such as the Remington 870. With some eleven million Remington 870s sold it isn’t an unknown quantity. And while the 870 DM differs significantly from the original 870, it is essentially still a Remington 870 pump action. The DM is offered in several versions including tactical and hunting versions. My shotgun and the one used in this test is a standard wood furniture version with bead front sight. There are tactical and hunting versions of the DM listed on the Remington website.

870 DM
The magazine is well designed.

If you use an AR 15 type rifle then the use of a shotgun with a detachable magazine will be simple enough. The original 870 uses a tubular magazine under the barrel. In different versions this tube holds four to eight shells. The shells are loaded one at a time. The advantage of simply loading the piece with a detachable magazine is obvious. I have to point out that the tube fed shotgun may be topped off with a shell or two as needed during an action if the need is there. Just the same, if the shotgun is fired empty and you need a reload right now the removable box magazine is the way to go. It is much faster to change a magazine than to thumb the shells into place one shell at a time. The DM, like all 870s, may be quickly fired by opening the action dropping a shell in the chamber and firing. The tube under the barrel with the DM is simply a tube that serves as a guide for the forend as it is used to rack the action.

The magazine well looks like an aftermarket addition but isn’t. The receiver isn’t a standard 870 and the bolt differs as well. The mechanical operation is a pump action 870 but the parts of the DM are not interchangeable with the 870 in many cases. Even the trigger group is different. However, common accessories such as stocks and forends do interchange and the many different barrel types for the 870 also may be used in the 870 DM. Operation of the 870 DM is straightforward. The magazine doesn’t load like a rifle magazine but a shotgun magazine and the shells are pressed firmly to the rear to load. The magazine locks solidly in place with a bit of practice. The magazine release is placed forward of the magazine.

Depending on arm length, shooting style and even clothing, when you are firing the shotgun and racking the forend the arm may contact the magazine. Keep the elbow bent slightly in order to be certain you do not contact the magazine with the arm on the backstroke. The action is as smooth as any modern Remington 870 and that is pretty smooth. Chances are the shotgun will smooth up with use as my Magpul Tactical Remington 870 has. The advantage or disadvantages of the shotgun with a detachable magazine will be debated. The magazine tube is proven and does not interfere with stashing behind the truck seat or riding in a rack in a police cruiser. The tube is easily loaded and it is practically unknown for a shotgun magazine tube to fail.(Disregarding cheap plastic aftermarket extensions.) The magazine is easily loaded for those familiar with magazine fed rifles. An important advantage for safety is that the shotgun is more easily unloaded with the magazine. Rather than pressing tabs in the shotgun to release shells from the tub one at a time, the DM may be unloaded simply by removing the magazine. The DM version holds a total of seven shells with six in the magazine and one in the chamber. The tactical versions of the tube fed 870 hold eight in the magazine, standard versions four. I recommend against anyone keeping a shell in the chamber for home defense. The shotgun may be made ready quickly enough to face a threat. Shotgunners often keep a slug or two along with buckshot in a shell carrier on the receiver of the shotgun. With the DM version a brace of slugs may be kept at ready in a removeable magazine. A trained individual using a standard pump shotgun may change out to a slug in the chamber quickly, changing the gunload is another matter. There are a lot of options and debates concerning the DM and I am certain it will not replace the traditional tube fed shotgun. New buyers not familiar with tube fed shotgun are probably going to be the most common customer.

870 DM
This is a fast handling and effective shotgun.

Over the course of several days two hundred twenty shells were fired, a goodly number for such a hard kicking beast. The shotgun is smooth enough and tracks well and I was able to get good results on target after a modest acclimation. Reduced recoil buckshot is a proven law enforcement load that should prove ideal for home defense as well. Reducing the velocity of the buckshot load actually results in a tighter pattern with the 18 inch barrel Remington. The 870 DM had no problem handling this loading. Patterns were as good as with any Remington shotgun. I used Remington 12 gauge 00 buckshot in the Managed Recoil line. Results were excellent. I have also used the new #4 buckshot loading in the Ultimate Defense line. Results were good. I think that the Remington DM is a modern shotgun with much appeal. It is useful for defense against dangerous animals or light cover if needed- simply switch to slugs. The Remington 870 DM is a useful and reliable shotgun per our testing. For many the 870 DM will be a great improvement.

870 DM
#4 buckshot offers a good pattern.

READ MORE HERE

RELOADERS CORNER: Priming, Part 2

Facebooktwittergoogle_pluspinterestyoutube

Last time the tooling and process of seating a primer got detailed, and now more details about The Thing Itself. Read all about it…

primer close up

Glen Zediker

A primer consists of a brass (usually) cup filled with impact-detonated explosive compound, lead styphate specifically. Right. Primers explode. The compound starts as liquid, not that that matters, and while it’s still wet, a triangular metal piece called an “anvil” is positioned in the opening. When it’s hit by the firing pin, the center of the cup collapses, squeezing the explosive compound between the interior of the cup and the anvil. That ignites the compound and shoots a flame through the flash hole. That ignites the propellant.

There are two primer sizes, and then type variations. The two sizes are “small” and “large.” For example, .223 Rem. uses small, .308 Win. uses large. Rifle primers and pistol primers are not the same, even though they have diameters in common. Rifle primers have a tougher cup, and, usually, provide a hotter flash. Do not substitute pistol primers for rifle primers! Some pistol shooters using very high-pressure loads substitute rifle primers, but also often need to increase striker impact power.

Variations: There are small variations in primer dimensions, heights and diameters, and also variations exist in new-case primer pocket dimensions, among various brands, and, of course, lot-to-lot variations can and do exist within any one brand. Usually, these variations are not influential to suitability. Usually. However! On occasion, small diameter variations can affect how well different primers will feed through various make priming apparatus. This can and has become a hitch in some progressive loading machines. Cup height variations can lead to seating depth (primer height) issues.

Remington 7-1/2 primers
I have my “go-to” primer, as do most, but I’ve found best results in certain circumstances with another brand. I will not vary primers, though, in my tournament ammo for any one day: as with propellants and bullets, each leaves a different residue in the bore, and that will, not can, influence zero making the switch. In other words, I won’t use CCI for short-line loads, and Remington for 600-yard ammo, not on the same day.

There are also “magnum” primers. These have a hotter spark. They are engineered to deliver a stouter kick-off to larger, more dense columns of slower-burning propellant. They also work well with spherical-type propellants (less air space between the granules). There are also “match” primers. These ostensibly are more consistent quality. Not all manufacturers offer these options. If they do, unless you have a scheme or more carefully-considered reason, just go with what fits your application. There’s no need for match primers in blasting ammo. There are, no doubt (and no doubt significant) differences among varying brand primers with respect to “output.” As mentioned earlier on, there are also pretty well-known tendencies that are either more or less preferable among varying primer brands.

The primer is, in my experience, the greatest variable that can change the performance of a load combination, which is mostly to say “pressure.” Never (never ever) switch primer brands without backing off the propellant charge and proving to yourself how far to take it back up, or to even back it off more. Don’t deny this one.

I back off one full grain of propellant to try a different primer brand.

Finding the best-performing primer for any particular combination of cartridge, bullet, and propellant isn’t just always as easy as putting a “match” primer in there. I have my preference, and it’s what I try first, but, to be certain, sometimes best accuracy and consistency (related) come with another. Again, it’s a combination of propellant fill volume, burning rate, propellant type (single-base, double-base, extruded, or spherical), and column “packing” density that favors either a “hotter” or “cooler” flash.

Priming cup composition also factors mightily in my final choice, and that’s a big factor in some semi-autos. More next time.

primer tray
Here’s handy. A primer “flip” tray puts all the primers in the sams orientation and orients them for easy loading into a primer magazine feed tube for use in many automated systems. See what’s available at Midsouth HERE

SAFETY
Do be extra careful handling primers! No kidding. It’s the most explosive element in a cartridge, and it’s intended to be detonated from impact, so… Wearing safety glasses at the loading bench might seem nerdy, but it’s wise. Likewise, and this has happened way on more than once, but, fortunately, never yet to me, is a mass detonation of primers contained in a feeding device, such as a primer feeding magazine tube. Such circumstance is grave indeed. Progressive loading machines, as well as many bench-mounted appliances, use a tube magazine that contains the primers. This tube must be filled, like any magazine. Make sure you know when full is full, and don’t try to poke in one more. This is usually when “it” happens. Remember, primers are detonated via pressure. Said before, but important enough to say again now: Never (ever) attempt to more deeply seat a primer on a loaded round. And keep the priming cup (the tool part that holds the primer for seating) clear of all debris. I’ve heard tell of brass shavings, leftover tumbling media, and the like, getting between the primer and the tool cup, and forming its own little firing pin.

See what’s available at Midsouth HERE

The information in this article is from Glen’s newest book, Top-Grade Ammo, available HERE at Midsouth. Also check HERE for more information about this and other publications from Zediker Publishing.

Mad for Magpul

Facebooktwittergoogle_pluspinterestyoutube

Long before you’ll feel the excitement on the range of a 3-gun match you’ll need to pick your poison, and by that, I mean you’ll need to determine the guns you want to shoot. Continue reading Mad for Magpul