Springfield Armory will feature its SAINT lineup of AR-15s as patrol rifle considerations during the annual National Patrol Rifle Conference (NPRC), June 1-2 in Detroit, Michigan. READ MORE
SOURCE: Springfield Armory
Each year the NPRC brings together law enforcement officers across the country for a patrol-focused conference highlighting seminars and active shooter training drills that promote improved readiness and preparedness. The second day of the conference is dedicated the Patrol Rifle Championships which include both competition and live-fire scenarios for both current and former law enforcement officers.
During the Patrol Rifle Championships, each competitor faces multiple courses of fire that reflect circumstances a law enforcement officer might encounter on the job. Each stage is meant to test and evaluate three areas of expertise: marksmanship, CQB techniques and a general understanding and responsiveness to patrol rifle engagements. Springfield Armory shooter and veteran LE Officer, Steve Horsman, will be competing in the match using his SAINT with Free Float Handguard.
“We are excited to present our SAINT AR-15 line to the law enforcement community at the NPRC,” says Springfield Armory VP of Marketing, Steve Kramer. “We believe every officer in the nation deserves to have a combat-grade patrol rifle that they can stake their life on. Our SAINT line is designed to be that rifle.”
The SAINT AR-15 lineup is well-equipped for patrol with a variety of options to fit any department’s needs. Combat-grade in both construction and reliability, the original SAINT AR-15, SAINT with Free Float Handguard, and SAINT Edge are lightweight, made from aircraft grade 7075 T6 aluminum, and feature fully Magnetic Particle Tested shot peened bolts. Additional features include the proprietary adjustable Accu-Tite™ tension system to reduce receiver play, and premium Bravo Company furniture. As a shorter offering, the SAINT SBR and SAINT Edge SBR house the premium features and components of the full-length SAINT and SAINT Edge in an 11.5” barrel for maximum portability and versatility. The SAINT Pistol chambered in 5.56 and .300 BLK rounds out the SAINT family with a 7.5-in. and 9-in. barrel, respectively. An SB Tactical SBX-K forearm brace finishes the package for a compact, yet formidable patrol firearm.
For more information on the Springfield Armory SAINT line of AR-15s,CLICK HERE
This outstanding handgun flaunts a rebirth of a trigger mechanism, and design, that has been overshadowed in the vast array of common striker-fired pistols, but one that has strong merits. Read more…
SOURCE: Shooting Illustrated, by Tamara Keel
There was a time, back in the 1970s and ’80s, when giants strode the earth of the desert Southwest. At the time, semi-automatic handguns came mostly in two flavors: Single-action pistols — which were endorsed and carried by these giants –and pistols that were double-action on the first shot and single-action on subsequent shots, which were derided by the giants as “crunchentickers.”
The logic behind these sorts of pistols was that they could be carried safely decocked, yet be ready to fire with just a pull of the trigger. The downside was that the transition between the long, heavy initial trigger pull and the subsequent lighter, shorter pulls required more initial training and sustainment practice to maintain proficiency. So, the “crunchenticker” was seen as the lowest-common-denominator issue gun, while the real shooters used single-action pistols.
And, fast-forward to 1985, then came the striker-fired Glock and soon after all of its market competitors. Featuring only a single trigger pull to master, these pistols quickly became the singlemost-common variant in domestic law enforcement (and, anecdotally, coincided with a jump in qualification scores at police departments across America) and private-citizen use.
Fast forward to the present day, and in some sectors there’s a renewed interest in hammer-fired, traditional double-action (TDA, for short) pistols among a varied spectrum of serious shooters, and for a number of reasons.
In the competitive-shooting world, TDAs started owning Production Division in USPSA and IPSC. This was partially because so many current models were metal-framed and heavier than their striker-fired, polymer competitors. The TDA trigger itself was a big factor, too. As a friend explained to me, “You get one lousy trigger pull and 10 great ones, rather than 11 mediocre ones.”
On the tactical side of things, I know a few instructors who strongly favor the longer initial pull of the TDA in defensive guns for the reason that these pistols are threat-management tools. Guns get drawn — and even pointed — a lot more often than they get fired, they explained, and that longer trigger pull can be an added cushion against a nervous trigger finger getting into the wrong place.
One last reason for the renewed interest in hammer-fired TDA pistols is the increase in popularity of Appendix Inside-The-Waistband (AIWB) carry. When holstering in an AIWB holster, the user can control the hammer of a TDA pistol with the thumb of the firing hand. This serves the purpose of alerting the shooter to any unnoticed obstructions that may have gotten into the trigger guard and snagged the trigger by letting them feel the movement of the hammer.
Unfortunately for enthusiasts of the hammer-fired pistol, the selection on the market isn’t what it used to be, especially in the concealable, mid-priced variety. Furthermore, while Beretta, SIG Sauer, and Heckler & Koch all offer concealable TDA pistols, all but a couple up-market offerings from SIG are double-stack guns, and right now the market is madly in love with slim, single-stack concealment pistols for CCW.
The Springfield Armory XD-E, a single-stack, polymer-frame 9 mm, took the market by surprise early in 2017, representing a new addition to the company’s line of XD pistols.
While it uses the name and familiar styling elements of the XD series of guns, including the prominent “GRIP ZONE” markings on the grip, the Springfield Armory XD-E is pretty much an entirely different pistol. It shares almost nothing but the magazine and sights with Springfield’s existing single-stack line, the XD-S, and even there it only uses the XD-S extended magazines.
In size, heft and overall concept, the Springfield-Armory XD-E reminds one of the long-discontinued Smith & Wesson 3913. It’s just slightly larger than the Glock G43 or Smith & Wesson M&P Shield, since the standard magazine holds 8 rounds and the spare that ships with the gun is a 9-rounder with a grip-sleeve adapter. The magazines both come fitted with pinky rest extensions on their floorplates, but these can be switched with flat floorplates (included) for those who prefer a flush-fit contour for concealability.
The grip is as slender as you’d expect from a polymer-frame, single-stack gun. The widest point of the pistol, measured across the low-profile ambidextrous thumb safeties, is only 1.125 inches.
Those ambi thumb safeties function in the same fashion as the classic 1911 thumb safety: up for safe and down for fire. Pressing down further past the off-safe position safely de-cocks the hammer. The magazine release is also fully ambidextrous, but the slide release is single-sided. The slide stop was a little difficult to run when the gun was new, but became easily useable after a few boxes of ammo.
Atop the slide on the Springfield Armory XD-E are sights compatible with the current XD dovetail dimensions (which are, entirely uncoincidentally, the same as the classic SIG Sauer P-series.) There’s a Novak-esque no-snag rear sight with two white-painted dots, and the standard front sight on the gun is a fiber-optic unit with a very visible red light pipe. Between the front and rear sights is the familiar loaded-chamber indicator of the XD-series — a hinged tab that pops up when there’s a round in the chamber.
The slide has six broad, but shallow, grasping grooves on each side at the rear, and forgoes the current trend toward forward cocking serrations, which is probably a good idea on a pistol with a 3.3-inch barrel. All in all, the ergonomics on the Springfield Armory XD-E are solid. The textured areas are grippy without being too aggressive, and it’s not textured where it doesn’t need to be. The trigger guard could be a little larger, though. Folks with big fingers might have difficulty while wearing gloves when the trigger is in its fully forward, double-action position.
While it’s technically possible to carry the Springfield Armory XD-E cocked and locked in “Condition One,” the low-profile thumb safeties don’t exactly encourage it. Instead, the simplest thing is to load the pistol, chamber a round, use the safety/decocker to safely drop the hammer, and then holster up. Personally, I’d be interested in a decocker-only version to avoid the possibility of inadvertently actuating the safety when I didn’t mean to, but enough folks like the belt-and-suspenders approach of both a double-action pull and a manual safety that Springfield Armory chose to introduce this version.
At the range, the pistol shot well — frankly, better than I expected. I was anticipating an experience along the lines of what I’ve had with a G43 or a Shield, but the slightly larger size of the Springfield Armory XD-E pays dividends in shootability, thanks to a larger grip and enhanced recoil control. At the pistol’s launch event in Las Vegas, stages were set up with targets as far as 50 yards, and the better shooters among us were knocking those over with aplomb.
This was aided by a very usable trigger. My Springfield Armory XD-E test sample’s double-action trigger pull gauged at 11 pounds and, while it stacked noticeably prior to break, it was plenty smooth. Single-action measured 5.5 pounds, with a short take-up before hitting a fairly abrupt “wall,” and then finished in a rolling break. Most impressively, through all the demo guns I fired over the course of the launch event, plus 750 rounds of assorted ammunition through my T&E sample, I have yet to see any malfunctions.
The Springfield Armory XD-E has a niche to itself for now. The only hammer-fired TDA single-stack 9 mm in the same size class is SIG Sauer’s metal-frame P239, which is 5 ounces heavier and has an MSRP nearly double that of the XD-E. Sitting right at the confluence of two trends, AIWB carry and single-stack, subcompact 9 mm pistols, it will be interesting to see how well the XD-E does in the marketplace. If it sells, will other models be spun off the gun’s TDA lockwork? Maybe a full-size, single- or double-stack service pistol? Stay tuned…
We have been waiting a long time for Springfield’s AR15 and it is worth the wait, and worth the money. Here’s why…
by Bob Campbell
Springfield’s ads had been teasing us with the introduction of a new product and very recently we learned that the SAINT was an AR15-type rifle. This is the first-ever AR15 with the proud Springfield Armory stamp. The rifle had been described as entry level but this isn’t really true. There are more expensive rifles but the Springfield isn’t cheap — it is simply below the $900 threshold. That is a pretty important price point. The rifle has good features and is built for reliability. The SAINT is intended to appeal to the young and adventurous and to those serious about taking responsibility for their own safety. I agree but older shooters such as myself who are able to discern quality at a fair price will also appreciate the SAINT. As a Springfield fan, the SAINT will take its place beside my 1903 Springfield and the modern 1911 Operator handgun, but there is more to the puzzle than the name. At present I have fewer than 600 rounds fired through the SAINT but the experience has been good. (I fire the rifles I test for real on the range, and not with the typewriter. I know the difficulty in firing one thousand rounds or more in an economic and physical sense.)
Let’s look at the particulars. The SAINT features the A2-style front sight/gas block and a folding rear sight. The rear sight is stamped with the Springfield “crossed cannons” emblem. The rear sight isn’t target grade but it is useful for short-range defense work and snagging predators to perhaps 100 yards, the use I will put this 6-pound, 11-ounce rifle to. The gas system is a mid-length architecture. Without getting into a discussion that would fill these pages all its own, the mid-length system is ideal for use with common bullet weights. The SAINT has a 16-inch barrel chambered for the 5.56mm NATO cartridge. This means you can fire .223 Remington or 5.56mm cartridges without a hint of trouble. Its 1-in-8 inch barrel twist is increasingly popular. Midway between the 7- and 9-inch twist this barrel twist rate has proven accurate with the majority of loads I have tested. So far this includes loads of 52 to 77 grain bullet weights.
The trigger is a GI-type that breaks in my example at 6.7 pounds. This is in the middle-ground for an AR trigger and it is clean and crisp. There is also a special coating that allows the trigger group to ride smoothly. The receivers are anodized aluminum, no surprises there, but the bolt carrier group is also specially coated, and stamped with the Springfield logo. I like that a lot. Springfield has added a new design with the Accu-Tite Tension system. This is a set screw located in the lower receiver that allows the user to tighten the receivers together. I like this feature and I probably will not add any other tightening measures to the SAINT. The furniture is Bravo Company and the handguard is a Springfield exclusive. The three-piece handguard features a heat shield in the lower base, and allows for accessory mounting via a keylock system. The handguard offers excellent grip when firing but doesn’t abrade the hand when firing in long practice sessions. I like the stub on the end of the handguard that prevents the hand from running forward onto the gas block. Optics are not optimally mounted on the handguard since it isn’t free-floated, so the receiver rail is available for mounting optics. The six-position stock utilizes a squeeze lever for six-point adjustment. The grip handle is the famous BCM Gunfighter.
To begin the evaluation I filled several magazines with Federal Cartridge Company American Eagle cartridges. The rifle had several hundred rounds through it and I expected the same performance for this Shooters Log test. These 55-grain FMJ cartridges burn clean, are affordable, and offer excellent accuracy in a practice load. I loaded the supplied MagPul magazine and a number of other various magazines I had on hand. The bolt was lubricated. AR15 rifles will run dirty but they will not run dry. I addressed man-sized targets at 25 and 50 yards, firing as quickly as I could get on target and align the sights. Keeping the hand forward on the handguard (and avoiding the gas block!) and controlling the rifle fast and accurate hits came easily. The rifle is controllable in rapid fire but then it is an AR15… The sights are adequate for the purpose. The Gunfighter grip is particularly ergonomic allowing excellent control. As for absolute accuracy with the iron sights, it isn’t difficult to secure 3-shot groups of two inches at 50 yards, par for the course with an iron-sighted carbine.
For a complete evaluation, you have to go further with accuracy testing and this means mounting a quality optic. I settled down with a mounted Lucid 6x1x24 rifle scope. This optic provides a good clear sight picture and has many advantages a trained rifleman can exploit. I settled down on the bench and attempted to find the best possible accuracy from the SAINT. Hornady has introduced a new line of AR15 ammunition. Since black rifles run on black ammunition the new loads should prove popular. My test samples of Hornady Black Ammunition featured the proven 75-grain BTHP. This is a good bullet weight for longer-range accuracy and it proved to give good results in the SAINT. I also tested a good number of popular .233 loads including a handload of my own, using the 60-grain Hornady A-Max bullet.
I have also mounted a MeoRed red dot with excellent results. For use to 50 yards this red dot offers good hit probability and gets the Springfield up and rolling for 3-Gun Competition.
I like the Springfield SAINT. I drove in the rain to get the rifle and was at the door at my FFL source when they opened. I had to wait to hit the range! I am not disappointed and the SAINT is going to find an important place in my shooting battery.
Bob Campbell is an established and well-respected outdoors writer, contributing regularly to many publications ranging from SWAT Magazine to Knifeworld. Bob has also authored three books: Holsters For Combat and Concealed Carry (Paladin Press), The 1911 Semi Auto (Stoeger Publishing), and The Handgun In Personal Defense (The Second Amendment Foundation).